- HOME
- Conventional Welding Consumables
- Flux
- MAXFLUX SAF-704
Flux
MAXFLUX SAF-704
AWS: SFA
EN ISO CODE:
Maxflux SAF-704 is a fluoride-basic type flux suitable to weld with composite SAW wires. The flux is neutral in nature and is also suitable with all HF (Hard Facing) class wires. The deposited weld metal has low diffusible hydrogen content and crack resistant during hard surfacing.
Maxflux SAF-704 flux suited with composite SAW wires. With ECNi2 wire the weld metal gives excellent mechanical and charpy V notch impact properties (40-70J at - 51ºC). For hard surfacing application on steel mill rolls, the flux is suitable with Maxfil HF-20,Maxfil HF-30,Maxfil HF-45 &Maxfil HF-55wires depending upon the composition & hardness requirement. Recommended welding procedure shall be followed as in our product literature
| WITH SAW WIRE | Elements | C | Mn | Si | Cr | Ni | Mo | N | |
| AUTOTHERME GRADE-HC |
|
0.05-0.10 | 1.0-1.6 | 0.30-0.70 | - | 2.0-2.9 | - | - | |
| MAXFIL HF-20 | Typical | 0.08 MAX | 0.50-1.20 | 0.60 MAX | 1.2-2.0 | 2.0-3.0 | 0.40-0.80 | 0.06-0.15 | |
| MAXFIL HF-30 | Typical | 0.20 MAX | 0.50-1.20 | 0.60 MAX | 4.0-8.0 | 2.0-4.0 | 0.40-0.80 | 0.06-0.15 | |
| MAXFIL HF-45 | Typical | 0.10-0.30 | 0.80-1.60 | 0.80 MAX | 11.0-14.0 | 3.0-4.5 | 0.40-0.80 | 0.06-0.15 | |
| MAXFIL HF-55 | Typical | 0.30-0.60 | 1.0-2.0 | 0.80 MAX | 4.0-6.0 | 0.50-1.00 | 0.50-1.00 | 0.06-0.15 |
| WITH SAW WIRE | UTS | 0.2% YS | % EI | Hardness 3L |
| (Mpa) | (Mpa) | (L=4d) | (HRC) | |
|
AUTOTHERME GRADE-HC |
550-700 | 470-600 | 24.0-27.0 | - |
|
MAXFIL HF-20 |
- | - | - | 23-28 |
|
MAXFIL HF-30 |
- | - | - | 30-40 |
| MAXFIL HF-45 | - | - | - | 42-48 |
| MAXFIL HF-55 | - | - | - | 52-54 |
BASICITY INDEX : ~1.80-3.40
DE TAP DENSITY : 1.10 – 1.40 g.m. / c.c.
GRAIN SIZE : (+5BSS): 0%,(-10,+44 BSS):90-95%,(-100 BSS): 0-2%
PACKAGING : 25 Kg POLY-LINED PAPER BAG
Flux
