Maxfil-81W is an all position low alloy steel flux cored wire designed for welding of high strength weatherresistant grade steels. The wire gives optimum performance with 100% CO2 shielding and characterized with smooth metal transfer, uniform welding even on vertical-up stringer beads and easy slag removal. In fillet welds, the bead contour is flat to slightly convex with equal leg lengths and uniform sidewall wetting. Weld metal is free from porosity and conforms to X-ray soundness.
Maxfil-81W is designed for single and multi-pass welding of weather resistant steels - Corten steels grade A/B, Class 1 steels of type A of SA-533, etc.
Element | C | Mn | Si | S | P | Ni | Cr | Cu |
Range | 0.12 | 0.50-1.30 | 0.35-0.80 | 0.030 | 0.030 | 0.40-0.80 | 0.45-0.70 | 0.30-0.75 |
Typical | 0.060 | 1.12 | 0.41 | 0.012 | 0.014 | 0.65 | 0.50 | 0.36 |
Property | UTS | YS | El | R.A | CNV Impact (Joules) |
(MPa) | (MPa) | (L= 4d)% | % | at -20°C | |
Range | 490 Min | 350 Min | 22.0 Min | 40.0 Min | 50 Min |
As Welded | 620 | 550 | 26.0 | 57.0 | 55 |
Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
1.20 | 24-28 | 160-260 | 22-26 | 100-160 | 22-25 | 100-160 |
1.60 | 24-28 | 180-300 | 22-26 | 110-200 | 22-25 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU, OH
E81T1-B2M
E81T1-B1C
E90T5-K2C
E100T5-K3C
E70T5-A1C
E81T1-A1C
E101T1-K3C
E81T1-G
E81T1-B2C
E80T5-GC
E90T5-GC
E110T5-GC
E80T5-B2C
E90T5-B3C
E71T1-GC
E120T5-GC-H4
E81T1-K2C/M
E70T5-GC
E90T5G-M
E91T1-B3C
E81T5G-M
E71T1-A1C/M
E80T5-GC
E80T5G-C
E81T1G-C
E110T5-K4C
E111T1-K4C
E80T5-Ni1C
E81T1-Ni1C
E91T1-K2C
E100T5-D2C
E81T1-Ni2C