ENQUIRE NOW

Low Alloy Steel Wire

MAXFIL-41B3

AWS: SFA 5.29 E90T5-B3C

EN ISO CODE: 17632-B T57ZT5-0CP-G

Maxfil-41B3 is a low alloy steel flux cored wire designed to deposit approximately 2.25%Cr-1.0%Mo weld metal for high temperature creep resistance applications. The wire gives optimum performance under CO2 shielding with radiographic quality weld deposits. The wire produces thin & friable slag covering with shiny bead appearance.

Maxfil-41B3 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; Gr. F22 of SA-182 & and SA-336, Gr. T4/T22 of SA-199, Gr. T22 of SA-213, Gr. WC9 of SA-217, Gr. P22 of SA-335, Gr. FP22 of SA-369, Gr. 22/22L of SA-387, Gr. CP22 of SA-426, Gr. 22 of SA-541, Class 1 of A, B types of SA-542, etc.

Approvals

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Cr	Mo
Range	0.05-0.12	1.25	0.80	0.030	0.030	2.00-2.50	0.90-1.20
Typical	0.055	1.00	0.32	0.012	0.018	2.34	1.01

MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	YS	El
	(MPa)	(MPa)	(L= 4d)%
Range	620-760	540 Min	17.0 Min
SR : 690°C/1Hr	692	608	20.0

WELDING PARAMETER: DC (+)

Diameter (mm)	Horizontal	Horizontal	Flat	Flat	Vertical UP	Vertical UP
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-28	160-260	24-28	160-260	18-22	100-160
1.60	24-28	180-300	24-28	180-300	18-22	110-200

PACKING

STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS

Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS

H, F, VU

Low Alloy Steel Wire