Maxfil-71W designed for single and multi pass welding on Weathering Corten Weathering A1 steels. The wire burns with smooth arc and low spatter. Weld metal contains extremely low diffusible hydrogen (<4ml per 100gm). The wire gives optimum performance with 100% CO2 shielding and characterized with smooth metal transfer, uniform welding even on vertical-up stringer beads and easy slag removal. The weld metal mechanical properties afford a high degree of security against heavy stress and for welds on thick
Element | C | Mn | Si | S | P | Ni | Cr | Cu |
Typical | 0.035 | 0.60 | 0.38 | 0.006 | 0.010 | 0.35 | 0.26 | 0.40 |
Property | UTS | YS | El | CNV Impact (Joules) |
(MPa) | (MPa) | (L= 4d)% | at -20°C | |
As Welded-Typical | 590 | 520 | 25 | 90 |
Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
1.20 | 24-28 | 160-260 | 22-26 | 100-160 | 22-25 | 100-160 |
1.60 | 24-28 | 180-300 | 22-26 | 110-200 | 22-25 | 110-200 |
H, F, VU, OH
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
E81T1-B2M
E81T1-B1C
E90T5-K2C
E100T5-K3C
E70T5-A1C
E81T1-A1C
E101T1-K3C
E81T1-G
E81T1-B2C
E81T1-W2C
E80T5-GC
E90T5-GC
E110T5-GC
E80T5-B2C
E90T5-B3C
E120T5-GC-H4
E81T1-K2C/M
E70T5-GC
E90T5G-M
E91T1-B3C
E81T5G-M
E71T1-A1C/M
E80T5-GC
E80T5G-C
E81T1G-C
E110T5-K4C
E111T1-K4C
E80T5-Ni1C
E81T1-Ni1C
E91T1-K2C
E100T5-D2C
E81T1-Ni2C