ENQUIRE NOW

Low Alloy Steel Wire

MAXFIL-42R

AWS: SFA 5.29 E111T1-K4C

EN ISO CODE:

Maxfil-42R is a low alloy steel flux cored wire designed for welding of high strength fine grained quenched & tempered steels to meet sub-zero impact resistance property down to -18°C. The wire is suitable for positional welding application, results easy slag removal and has excellent welders appeal. Weld bead is smooth & uniform and satisfies the requirements of radiographic quality.

Maxfil-42R is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; HY-80, NAXTRA-60/65, T-1, A/B grades of SA-203, A/B/C grades of SA-662, B/C grades of SA-737, etc. This wire is used for fabrication of penstock pipelines, crane plate, earth moving equipments and similar high strength applications, etc.

Approvals

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Cr	Ni	Mo	V
Range	0.15	1.20-2.25	0.80	0.030	0.030	0.20-0.60	1.75-2.60	0.20-0.65	0.03
Typical	0.062	1.50	0.33	0.014	0.018	0.36	2.34	0.38	0.005

MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	YS	El	CNV Impact (Joules)
	(MPa)	(MPa)	(L= 4d)%	at -20°C
Range	760-900	680 Min	15.0 Min	27 Min
As Welded	815	716	18.8	45

WELDING PARAMETER: DC (+)

Diameter (mm)	Horizontal/ Flat	Horizontal/ Flat	Vertical UP	Vertical UP	Overhead	Overhead
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-28	160-260	20-22	100-160	22-25	100-160
1.60	24-28	180-300	20-22	110-200	22-25	110-200

PACKING

STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS

Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS

H, F, VU, OH

Low Alloy Steel Wire