- HOME
- Conventional Welding Consumables
- Low Alloy Steel Wire
- MAXFIL- 36B
Low Alloy Steel Wire
MAXFIL- 36B
AWS: SFA 5.29 E80T5G-C
EN ISO CODE: 17632-A T46 3 Z B C
Maxfil-36B is a low alloy steel flux cored wire designed for welding of medium tensile steels structures subjected to dynamic loading, pressure vessels, etc. The wire gives good performance under CO2 shielding with radiographic quality deposits. The weld metal has excellent crack resistance & toughness at sub-zero temperatures.
Maxfil-36B is designed for single and multi-pass welding of medium tensile steels like; Aldur 45/60, BH 39/47, BHW 27/30, fine grained steels and equivalent grade steels like; SA-841, A/B/C grades of SA-662, etc.
| Element | C | Mn | Si | S | P | Mo |
| Typical | 0.06 | 1.60 | 0.45 | 0.011 | 0.016 | 0.50 |
| Property | UTS | YS | El | CNV Impact (Joules) |
| (MPa) | (MPa) | (L= 4d)% | at -30°C | |
| As Welded | 647 | 534 | 23.0 | 80 |
| Diameter (mm) | Horizontal | Horizontal | Flat | Flat | Vertical UP | Vertical UP |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 24-28 | 160-260 | 18-22 | 100-160 |
| 1.60 | 24-28 | 180-300 | 24-28 | 180-300 | 18-22 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU
Low Alloy Steel Wire
