ENQUIRE NOW

Low Alloy Steel Wire

MAXFIL-801G5

AWS: SFA 5.29 E80T5-GC

EN ISO CODE:

Maxfil-801G5 is a low alloy steel flux cored wire designed for welding of medium & high tensile strength steel, quenched & tempered steels, etc. where sub-zero impact resistance property of the weld metal is desired. The wire produces optimum performance and radiographic quality weld deposits under CO2 shielding. The weld has excellent bead appearance and easy slag removal.

Maxfil-801G5 is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; NAXTRA-60/65, Sumiten-610, A/B grades of SA-203, D/ E/ F/ G grades of SA-414, steel grades conforming to SA-455, Gr.60 & Gr.65 steels of SA-515 & SA-516, etc.

Approvals

CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Ni	Mo
Typical	0.060	1.28	0.42	0.015	0.022	0.80	0.25

MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	YS	El	CNV Impact (Joules)
	(MPa)	(MPa)	(L= 4d)%	at -46°C
As Welded	610	530	22.0	54

WELDING PARAMETER: DC (+)

Diameter (mm)	Horizontal	Horizontal	Flat	Flat	Vertical UP	Vertical UP
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-28	160-260	24-28	160-260	18-22	100-160
1.60	24-28	180-300	24-28	180-300	18-22	110-200

PACKING

STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.

QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELDING GAS

Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITIONS

H, F, VU

Low Alloy Steel Wire