Low Alloy Steel Wire
MAXFIL-81R
AWS: SFA 5.29 E81T1-B2M
EN ISO CODE: 17632-B T55ZT1-1MP-G
Maxfil-81R is an all position low alloy steel flux cored wire designed for welding of 1.25% Cr-0.5% Mo steel with high temperature and pressure service conditions in steam pipes and boilers. The slag coverage is complete and easy to remove. This wire burns with low spatter & minimal fumes with radiographic quality deposits.
Maxfil-81R is designed for single and multi-pass welding of similar composition steels and equivalent grade steels like; Gr. F2/F11/F12 of SA-182, Gr. T11 of SA-199, Gr. T2/T11/T12 of SA-213,Gr.WC6 of SA-217, Gr. P2/P11/P12 of SA-335, Gr. FP2/FP11/FP12 of SA-369, Gr. 2/11/12 of SA-387, Gr.CP2/CP11/CP12 of SA-426.
| Element | C | Mn | Si | S | P | Cr | Mo |
| Range | 0.05-0.12 | 1.25 | 0.80 | 0.030 | 0.030 | 1.00-1.50 | 0.40-0.65 |
| Typical | 0.062 | 0.80 | 0.40 | 0.012 | 0.017 | 1.25 | 0.52 |
| Property | UTS | YS | El |
| (MPa) | (MPa) | (L= 4d)% | |
| Range | 550-690 | 470 Min | 19.0 Min |
| SR : 690°C/1Hr | 600 | 520 | 25.0 |
| Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 26-32 | 160-260 | 22-26 | 100-160 | 24-28 | 100-160 |
| 1.60 | 26-32 | 180-300 | 22-26 | 110-200 | 24-28 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (80.20%) at flow rate 12-15 litres per minute.
H, F, VU, OH
Low Alloy Steel Wire
