Maxfil-34B (MDH) is a low alloy steel flux cored wire designed for welding of medium tensile (containing Nickel, Molybdenum) steels structures subjected to dynamic loading. The wire gives good performance under Argon-CO2 gas shielding with radiographic quality deposits. Presence of Nickel & Molybdenum in the weld metal, imparts an excellent crack resistance & toughness properties.
Maxfil-34B (MDH) is suitable for single and multi-pass welding of similar composition steels, fine grained steels and equivalent grade steels like; Gr. F1 of SA-182 and SA-336, Gr. A of SA-204, Gr. T1/T1a/T1b of SA-209, Gr. WC1 of SA- 217, Gr. A of SA-302, Gr. P1 of SA-335, Class 1 of A grade of SA-533 etc. Suitable for fabrication of heavy machinery, steel plant equipments & structures, high strength fabricated structures etc.
Element | C | Mn | Si | S | P | Mo | Ni |
Typical | 0.058 | 1.42 | 0.45 | 0.010 | 0.016 | 0.42 | 0.40 |
Property | UTS | YS | El | CNV Impact (Joules) |
(MPa) | (MPa) | (L= 4d)% | at -30°C | |
As Welded | 647 | 536 | 26.0 | 112 |
Diameter | Horizontal | Horizontal | Flat | Flat | Vertical UP | Vertical UP |
(mm) | Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A |
1.20 | 24-28 | 160-260 | 24-28 | 160-260 | 20-24 | 100-160 |
1.60 | 24-28 | 180-300 | 24-28 | 180-300 | 24-28 | 110-200 |
H, F, VU
Argon –Carbon Dioxide CO2 (80:20%) at flow rate 12-15 litres per minute.
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
E81T1-B2M
E81T1-B1C
E90T5-K2C
E100T5-K3C
E70T5-A1C
E81T1-A1C
E101T1-K3C
E81T1-G
E81T1-B2C
E81T1-W2C
E80T5-GC
E90T5-GC
E110T5-GC
E80T5-B2C
E90T5-B3C
E71T1-GC
E120T5-GC-H4
E81T1-K2C/M
E70T5-GC
E90T5G-M
E91T1-B3C
E71T1-A1C/M
E80T5-GC
E80T5G-C
E81T1G-C
E110T5-K4C
E111T1-K4C
E80T5-Ni1C
E81T1-Ni1C
E91T1-K2C
E100T5-D2C
E81T1-Ni2C