- HOME
- Conventional Welding Consumables
- Metal Cored Wire
- MAXFIL-MC-31
Metal Cored Wire
MAXFIL-MC-31
AWS: SFA 5.18 E70C-6M H4
EN ISO CODE: 17632-BT493T15-0MA-K
Maxfil-MC-31 is a gas shielded metal-cored wire (MCAW) designed for welding of low & medium tensile steel structures subjected to dynamic loading. The wire encompasses the deposition advantages of flux cored wire along with the high deposition efficiencies of a solid wire with both single and multi-layer applications. The deposited weld metal by MCAW is virtually free from slag covering and thus reduces post- weld cleaning time. The wire burns with a smooth arc and low spatter. Weld metal contains extremely low diffusible hydrogen (<4ml per 100gm). Maxfil-MC-31 is suitable for welding of similar composition steels and equivalent grade steels like; D/E/F/G grades of SA-414, Gr.60/Gr.65 steels of SA-515, Gr.60/ Gr.65 steels of SA-516, etc. This MCAW wire can be used for robotic welding applications.
| Element | C | Mn | Si | S | P | Ni | Cr | Mo | V | Cu |
| Range | 0.12 | 1.75 | 0.90 | 0.030 | 0.030 | 0.50 | 0.20 | 0.30 | 0.08 | 0.50 |
| Typical | 0.08 | 1.42 | 0.45 | 0.011 | 0.018 | 0.45 | 0.015 | 0.001 | 0.001 | 0.005 |
|
Property |
UTS |
YS |
%El |
CNV Impact (Joules) |
|
(MPa) |
(MPa) |
(L= 4d) |
at -30°C |
|
|
Range |
480 Min |
400 Min |
22.0 Min |
27.0 Min |
|
Typical |
556 |
474 |
26.0 |
72 |
Diffusible hydrogen content is 2.8ml per 100 gm of all-weld metal.(*) Tensile test piece aged for 48 hrs at 104oC
H, F
| Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP |
| Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 32-36 | 280-400 | 32-36 | 280-400 |
| 1.60 | 32-36 | 300-500 | 32-36 | 300-500 |
Argon - Carbon Dioxide CO (100%) at flow rate 12-15 litres per minute.
Standard size : 1.20 & 1.60mm. Other diameters may be available on request.
Quantity : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
