- HOME
- Conventional Welding Consumables
- Metal Cored Wire
- LoTherme MC-535(SPL)
.webp)
Metal Cored Wire
LoTherme MC-535(SPL)
AWS: SFA
EN ISO CODE:
A customized metal cored wire designed for fabrication of a new die and re-building of worn- out hot forging dies with higher hardness requirements. The deposited weld metal is resistant to heat, metal to metal wear & galling. It is free from cracks, porosities and any other surface defects. The wire has very good welder's appeal and easy slag detachability.
Approvals
RECOMMENDED SHIELDING GAS:
Co2 & Argon-CO2 mixed gas
TYPICAL ALL-WELD METAL COMPOSITION (%) WITH CO2 SHIELDING:
| Element | C | Mn | Si | S | P | Cr | Ni | Mo |
| Typical | 0.12 | 1.18 | 0.35 | 0.010 | 0.012 | 2.60 | 2.50 | 0.84 |
TYPICAL ALL WELD METAL HARDNESS:
| On a 3-layer deposit in as-weld condition | After SR at 5500C for 2 hours |
| 42-48 HRC | 40-45 HRC |
Electrical Characteristics: DCEP/DC (+)
| Diameter (mm) |
Current Range (Amps) |
Voltage(V) | Stick Out (mm) |
| 1.6 | 180 – 280 | 26 – 30 | 25 – 30 |
| 1.2 | 160 – 260 | 26 – 30 | 25 – 30 |
Standard Wire Diameter (mm):
1.2 and 1.6
Note : Any other diameter wires may be available on request.
Packing Data:
The wire is supplied in a layer wound 12.5/15 kg plastic spool. Each spool is sealed in polythene bag and then packed in a shrink-wrapped corrugated box.
Note : Any other type of packaging may be available on request.
