- HOME
- Conventional Welding Consumables
- Metal Cored Wire
- LoTherme MC-9650
Metal Cored Wire
LoTherme MC-9650
AWS: SFA
EN ISO CODE:
A customized metal cored wire designed for fabrication of a new die and re-building of worn-out hot forging dies. The deposited weld metal is martensitic stainless steel and highly resistant to heat, corrosion, wear & galling. It is free from cracks, porosities and any other surface defects.
Approvals
RECOMMENDED SHIELDING GAS:
Argon-CO2 gas mixture.
Note: Also works with 100% CO2 gas
TYPICAL ALL-WELD COMPOSITION WITH Ar-CO2 SHIELDING:
| Element | C | Mn | Si | S | P | Cr | Ni | Mo |
| Typical | 0.15 | 0.76 | 0.80 | 0.010 | 0.017 | 10.50 | 1.8 | 1.96 |
TYPICAL ALL-WELD METAL HARDNESS:
On a 3-layer deposit in as-weld condition: 42-50 HRC
WELDING CURRENT & STICK OUT:
|
Wire diameter (mm) |
Current (amp) |
Voltage (V) |
Stick out (mm) |
| 1.6 | 180-270 | 26-30 | 25-35 |
WELDING POLARITY:
DCEP/ DCRP/ DC (+)
STANDARD WIRE DIAMETERS:
1.60mm
PACKAGING:
The wire is supplied in a layer wound 12.5 kg plastic spool. Each spool is sealed in
polythene bag and then packed in a shrink-wrapped corrugated box.
Note: Any other type of packaging may be available on request.
.webp)
