- HOME
- Conventional Welding Consumables
- Stainless Steel Wire
- MAXFIL-308L
Stainless Steel Wire
MAXFIL-308L
AWS: SFA 5.22 E308LT0-1
EN ISO CODE:
Maxfil-308L is an all position stainless steel flux cored wire designed for optimum performance with 100% CO2 gas shielding. This wire is designed with fast freezing slag characteristics and good slag detachability. The wire welds satisfactorily in out of position and performs equally well when welding in the flat & horizontal position. The weld metal is of radiographic quality, resistant to cracking, and very good oxidation & scaling resistant at elevated temperature.
Maxfil-308L is designed for welding of low carbon similar composition steels like AISI 304/ 304L and their equivalents with excellent weld ability.
| Element | C | Mn | Si | S | P | Cr | Ni | Mo | Cu |
| Range | 0.040 | 0.5-2.5 | 1.00 | 0.030 | 0.040 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.75 |
| Typical | 0.025 | 1.32 | 0.60 | 0.010 | 0.015 | 19.5 | 9.5 | 0.010 | 0.030 |
| Property | UTS | El |
| (MPa) | (L= 4d)% | |
| Range | 520 Min | 30 Min |
| As Weld | 540 | 38 |
| Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-30 | 160-260 | 20-22 | 100-160 | 22-25 | 100-160 |
| 1.60 | 24-30 | 180-300 | 20-22 | 110-200 | 22-25 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm.
QUANTITY : Supplied approximately 12.5/15Kgs in a plastic spool. Each spool is sealed in an
air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU, OH
