ENQUIRE NOW

Stainless Steel Wire

MAXFIL-2209

AWS: SFA 5.22 E2209T1-1

EN ISO CODE:

Maxfil-2209 is an all position stainless steel flux cored wire designed for optimum performance with 100% CO2 gas shielding which deposit 22Cr – 8.5Ni – 3.5Mo and 0.10N. The wire welds satisfactorily in out of position and performs equally well when welding in the flat & horizontal position.

The wire Maxfil-2209 suitable for welding duplex stainless steels alloys like 2205 grades. (UNS 32205, UNS 31803) etc.

Approvals

TYPICAL CHEMICAL COMPOSITION OF ALL WELD METAL (%)

Element	C	Mn	Si	S	P	Cr	Ni	Mo	Cu	N
Range	0.040	0.5-2.0	1.0	0.030	0.040	21.0-24.0	7.5-10.0	2.5-4.0	0.75	0.08-0.20
Typical	0.025	1.10	0.65	0.010	0.011	23.5	8.80	3.20	0.040	0.10

TYPICAL MECHANICAL PROPERTIES OF ALL WELD METAL

Property	UTS	El
	(MPa)	(L= 4d)%
Range	690 Min	20 Min
As Weld	820	26

CURRENT & PACKING DATA: DC (+)

Diameter (mm)	Horizontal/ Flat	Horizontal/ Flat	Vertical UP	Vertical UP	Overhead	Overhead
	Volt, V	Current, A	Volt, V	Current, A	Volt, V	Current, A
1.20	24-30	160-260	20-22	100-160	22-25	100-160
1.60	24-30	180-300	20-22	110-200	22-25	110-200

PACKING

Standard size : 1.20 & 1.60mm.

Quantity : Supplied approximately 12.5/15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.

SHIELD GAS

Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.

WELDING POSITION:

H, F, VU, OH

Stainless Steel Wire