- HOME
- Conventional Welding Consumables
- Medium and High Tensile Steel
- ULTRATENSAL-MC
Medium and High Tensile Steel
ULTRATENSAL-MC
AWS: SFA 5.5 E10018M
EN ISO CODE:
Ultratensal- MC is a basic coated extra low hydrogen electrode. Weld metal displays excellent crack resistance and produces sound weld metal possessing excellent strength combined with good impact properties at sub zero temperature. It is ideally suited for welding high strength Q&T steels like WEL-TEN 80, WEL-TEN 690 RE-A, WEL TEN 690 RE-B, RDE-S-70, SA 517 grades and their equivalents. The electrodes are ideally suited for welding highly restrained joints in high strength steels under site conditions with high relative humidity since the extra low hydrogen content of the weld metal helps preventing hydrogen induced cracking.
| Element | C | Mn | Si | P | S | Cr | Ni | Mo | V |
| Percent | 0.06 | 1.35 | 0.45 | 0.020 | 0.020 | 0.25 | 2.0 | 0.30 | 0.01 |
| UTS | YS | Elongation | CVN Impact Strength (J) |
| (MPa) | (MPa) | (L= 4d)% | at Minus 50°C |
| 790 | 680 | 22.0 | 50 |
DIFFUSIBLE HYDROGEN CONTENT : 4.0 ml/100 gms of weld metal Max.
| Size (mm) | 5x450 | 4.0x450 | 3.15x450 | 2.5x350 |
| Current Range (Amps) | 180-240 | 140-180 | 90-140 | 50-90 |
| Qty. (Kgs./Carton) | 2 | 2 | 2 | 2 |
Medium and High Tensile Steel
ULTRATHERME-H
E10016-G
TENSAL-MH
E9018-M
ULTRATHERME
E11018-G
TENSAL-H4R
E9018-G H4R
ULTRATHERME-M
E 11018 M
CELLUTHERME-70P1
E7010-P1
SUPRATHERME
E7018
ULTRATENSAL-MH
E11018M
ULTRATENSAL-CU
E10018-G
CNM (SPL) M
E12018M
TENSAL (SPL)
E10018-D2
SUPRATHERME-R
E7018
CELLUTHERME-80MO
E8010-G
CNM (SPL)
E12018-G
ULTRATENSAL-SPL
E11016-G
ULTRATENSAL
E11018-G
TENSAL-MH (R)
E9018M H4R
INDOTHERME-CS
E7016
ULTRATENSAL-69
E12018G H4
TENSAL
E9018-G
ULTRATHERME-H4R
E11018-G H4R
SUPRATHERME (MOD)
E7018
CELLUTHERME – Mo
E7010-G
CELLUTHERME-AC
E6011
CELLUTHERME-P80
E8010-P1
TENSAL(MOD)
E9018-G
INDOTHERME
E7016
