Nickel and its Alloys
FW NiCr-3
AWS: SFA 5.14 ERNiCr-3
EN ISO CODE: 18274 S Ni 6082
FW NiCr-3 is a solid wire for GTA / TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality welds. This wire is used for welding a range of Inconel 600, 601, 690, Incoloy 800, 800H, 800HT, 9% Nickel steel, ASTM B 163, B 166, B 167, B 168 etc. Used for dissimilar applications with carbon steel to stainless steels, low alloy steel to stainless steel and also for 200 and 400 type alloys.
| Element | C | Mn | Fe | P | S | Si | Ni | Cu | Co | Ti | Cr | Nb+Ta |
| Percent | 0.08 | 3.0 | 2.0 | 0.015 | 0.008 | 0.20 | 71.5 | 0.20 | 0.004 | 0.50 | 20.0 | 2.5 |
| UTS | Elongation |
| (MPa) | (L= 5d)% |
| 600 | 36.0 |
STANDARD SIZE: Diameter 1.6 mm, 2.0 mm, 2.4 mm & 3.2 mm in cut lengths of 1000 mm each.
QUANTITY: 5 kgs wire put in an air-tight polythene bag and finally packed in a plastic container.
Identification – AWS code is punched on each wire.
Argon
DCEN
H, F, VU, OH
