Hard Surfacing Wire
MAXFIL-50H
AWS: SFA DIN EN 14700 TFe-2
EN ISO CODE:
Maxfil-50H is a basic type medium alloy gas shielded wire designed for air hardening type hard surfacing deposit. It has good welder’s appeal & easy slag detachability. The weld is not machinable and finished by grinding. The wire deposits a crack-free, martensitic weld metal suitable for heavy impact and moderate abrasion resistant applications.
Maxfil-50H wire is suitable for weld-surfacing & reclamation of agricultural equipments, forging dies, excavator components, conveyor buckets & screws, drill bits, scraper blades, conveyor parts, dredge rollers, concrete mixer blades, etc.
| Element | C | Mn | Si | S | P | Cr | Mo |
| Typical | 0.55 | 1.30 | 0.54 | 0.012 | 0.017 | 5.45 | 0.51 |
| Property | 2 Layer Hardness (BHN) | 3 Layer Hardness (BHN) |
| As Weld | 520-550 | 550-600 |
| Diameter (mm) | Horizontal | Horizontal | Flat | Flat |
| Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 24-28 | 160-260 |
| 1.60 | 24-28 | 180-300 | 24-28 | 180-300 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F
