- HOME
- Conventional Welding Consumables
- Mild Steel Wire
- MAXFIL- 15R
Mild Steel Wire
MAXFIL- 15R
AWS: SFA 5.20 E71T-5C
EN ISO CODE: 17632-B T493T1-1CA-K
Maxfil-15R is a semi-basic mild steel flux cored wire designed for all position welding with 100% CO2 shielding. The wire gives smooth burning characteristics, low spatter and easy slag removal. Filler contour is flat to slightly convex with equal leg lengths and uniform sidewall wetting. The deposited weld metal is of radiographic quality.
Maxfil-15R is designed for single and multi-pass welding of low and medium carbon steels grades like; C, D, E grades of SA-414, Gr.55, Gr.60 steels of SA-516 and equivalent grade steels, etc.
| Element | C | Mn | Si | S | P | Cr | Ni | Mo | V | Cu |
| Range | 0.12 | 1.75 | 0.90 | 0.03 | 0.03 | 0.20 | 0.50 | 0.30 | 0.08 | 0.35 |
| Typical | 0.062 | 1.10 | 0.37 | 0.015 | 0.020 | 0.015 | 0.020 | 0.001 | 0.015 | 0.008 |
| Property | UTS | YS | El | CNV Impact (Joules) |
| (MPa) | (MPa) | (L= 4d)% | at -29°C | |
| Range | 490-670 | 390 Min | 22 Min | 27 Min |
| Typical | 520 | 424 | 25.0 | 45 |
| Diameter (mm) | Horizontal/ Flat | Horizontal/ Flat | Vertical UP | Vertical UP | Overhead | Overhead |
| Volt, V | Current, A | Volt, V | Current, A | Volt, V | Current, A | |
| 1.20 | 24-28 | 160-260 | 20-22 | 100-160 | 22-25 | 100-160 |
| 1.60 | 24-28 | 180-300 | 20-22 | 110-200 | 22-25 | 110-200 |
STANDARD SIZE : 1.20 & 1.60mm. Other diameters may be available on request.
QUANTITY : Supplied approximately 15Kgs in a plastic spool. Each spool is sealed in an air tight polythene bag and then packed in a corrugated box.
Carbon Dioxide CO2 (100%) at flow rate 12-15 litres per minute.
H, F, VU, OH
