AWS: SFA
EN ISO CODE:
A customized gas-shielded flux-cored wire designed to deposit low-alloy steel weld metal for surfacing of hammer dies. The weld metal is tough, free from cracks, porosities, and any other surface defects.
LoTherme GS-9650 wire is suitable for weld-surfacing & reclamation of forging
dies, hot working tools & guides, etc.
Argon-CO gas mixture
Element | C | Mn | Si | S | P | Cr | Ni | Mo | V |
Typical | 0.21 | 0.92 | 0.95 | 0.018 | 0.022 | 10.5 | 2.0 | 2.3 | 0.20 |
On a 3-layer deposit in as-weld condition: 40-48 HRC
Diameter (mm) |
Current Range (Amps) |
Voltage(V) | Stick Out (mm) |
2.4 | 200 – 250 | 26 – 28 | 30 – 40 |
2.8 | 250 – 300 | 26 – 28 | 30 – 40 |
2.4 and 2.8
Note: Any other diameter wires may be available on request.
Supplied in a layer wound 12.5 kg plastic spool. Each spool is
sealed in a polythene bag and then packed in a shrink-wrapped corrugated box.